Configure the supplier emissions by model table

  • Release version: Australia
  • Updated March 12, 2026
  • 1 minute to read

    • Configure your supplier emission data collection to capture emissions by specific models of assets to report and calculate Scope 3 emissions accurately.

    Before you begin

    Role required: sn_esg.admin and sn_esg.program_manager

    About this task

    The data that is configured in the supplier emissions by model table is used in the automated metric definition for supplier data collection. Ensure that data is populated in supplier emissions by model table before the first run date of the metric definition.

    Procedure

    1. Navigate to All > Operational Sustainability Management > Scope 3 configurations > Supplier emissions by model.
    2. Select New.
    3. On the form, fill in the fields.
      Table 1. Supplier emissions by model form
      Field Description
      Model Model of your hardware for which you want to collect data.
      Supplier emission factor Measure used to quantify the amount of greenhouse gas (GHG) emissions produced per unit of a product or service provided by a supplier.
      Supplier emission factor year Specific year for which the emission factors provided by a supplier are applicable. Because the emission factors can vary every year, select a specific year in this field.
      Supplier Name of the supplier.
      Supplier emission factor unit Unit of measurement used to quantify the emissions per unit of activity, material, or energy consumed. The units supported are as follows.
      • KgCO2e/$: If you select this unit, then the calculation happens by multiplying the sum of cost by the dollar.
      • KgCO2e/unit: If you select this unit, then the calculation happens by multiplying the units by the emission factors.
    4. Select Submit.