Validate NIDS sensors

  • Freigeben Version: Australia
  • Aktualisiert 12. März 2026
  • 1 Minute Lesedauer

    • Validate the Network IDS (NIDS) sensors once they're imported to prepare for device import. The sensors can only pass the validation if they aren't in learning mode as such sensors aren't eligible for device import.

    Vorbereitungen

    It's recommended that you have the CSDM plugin installed. The Service Graph Connector aligns with the life cycle data models as per the CMDB standards. For more information, see .

    Role required: cmdb_nids_admin

    Warum und wann dieser Vorgang ausgeführt wird

    The Life Cycle Stage and Life Cycle Stage Status fields are used to capture the learning mode of a sensor. If the Life Cycle Stage field is set to Operational and Life Cycle Stage Status is set to Learning Mode, then validation is unsuccessful. If the Life Cycle Stage Status field is set to In Use, the validation is successful.

    Prozedur

    1. Navigate to All > Network IDS Appliances (NIDS) > Sensors.
    2. Select the sensor record that you want to validate.
    3. In the NIDS Assigned Meta Data section, add values for the sensor that you want to be assigned to the detected devices.
    4. In the NIDS Admin Configuration section, make sure that the Life Cycle Stage Status field value isn't Learning Mode.
      Otherwise, the validation fails.
    5. Make sure that the NIDS network type field is set based on the NIDS network location.
      For example, you can select an NIDS network type of IT for a data center deployment of the NIDS, or an NIDS network type of OT for an industrial deployment on an Industrial/OT network.

      If you select OT, the OT device details are created for all devices.

    6. When the attributes are correctly filled out, select Validate.
      Hinweis:
      NOTE: The attributes passed from the sensor to the devices are defined in the sn_cmdb_ci_class.nids_map_fields system property. The following list is the default list of attributes.
      • assigned_to
      • location
      • company
      • owned_by
      • managed_by
      • supported_by
      • change_control
      • support_group
      • managed_by_group
      • assignment_group
      • zone
      • isa_entity_site (only available if you have the Industrial Process Manager application installed)