Configure filter for audit

  • Versão de lançamento: Australia
  • Atualizado 12 de mar. de 2026
  • 1 min. de leitura

    • Define filtering conditions to control the scope of Telecom Discrepancy audits. These filters ensure that audits run only on the desired set of CIs, improving performance and targeting accuracy.

    Antes de Iniciar

    Role required: admin

    Por Que e Quando Desempenhar Esta Tarefa

    Understanding Filtering Conditions in Telecom Discrepancy Audits
    • Audits use filtering conditions to narrow the scope of CIs being evaluated.
    • Filtering conditions are essential for narrowing down audit targets.
    • You can define and modify conditions per audit instance to meet specific audit requirements.
    • Filtering by discovery_source is a common condition to filter records associated with particular integration sources (e.g., TSOM and Altiplano). Additionally, you can customize the filter according to the audit requirements.
    • Each version of the audit can have a different filtering condition.
    The following are the audit filters:
    1. Telecom Logical Connections Discrepancy Audit: This audit runs at the logical connection table. The default filter condition is defined as discovery_source like TSOM. This condition is applied on each CI in the logical connection table.
    2. Telecom Network Topology Discrepancy Audit: This audit runs at the network topology table. The default filter condition is defined as discovery_source like TSOM. This condition is applied on each CI in the network topology table.
    3. Telecom Discrepancy Audit: This audit runs at the relationships table. The default filter condition is defined as discovery_source like TSOM. This condition is applied on each CI at the equipment level.

    The following screenshot helps to understand the user interface of the certification filter The user interface of TSOM certification and logical connection discrepancy audit filter.

    Procedimento

    1. Navigate to All > Certification > Filters.
    2. Select New.
      The certification filter interface appears.
    3. Fill in the fields.
      For more guidance, see Create a filter.
    4. Add the filter conditions.
      For example, Discovery source contains TSOM.
    5. Select Submit.
      The filter is created.

    Resultado

    You can use the filter in the logical connection audit.