Configure the card limit for Visual Task boards

  • Versão de lançamento: Australia
  • Atualizado 12 de mar. de 2026
  • 1 min. de leitura

    • Freeform and data driven boards can display up to 1,000 cards by default. You can change the default card limit by adding a system property.

    Antes de Iniciar

    Role required: admin

    Por Que e Quando Desempenhar Esta Tarefa

    You can set card limit for both Freeform board and Flexible and Guided board in Data Driven board.

    Procedimento

    1. Add a new system property with the following field values:
      Tabela 1.
      Field Value
      Name glide.vtb.board_max
      Type integer
    2. Set the Value to the maximum number of cards allowed for each board.
      Nota:
      Performance degradation may occur if you set the Value to a number greater than 1,000, especially on tablet devices.