---
sourceDocument: Australia ServiceNow AI Platform Capabilities
sourceDocumentLink: https://servicenow-prod.fluidtopics.net/r/de-DE/servicenow-platform

 Release :

    - australia

ft:locale :

    - de-DE

ft:publication_title :

    - Australia ServiceNow AI Platform Capabilities

ft:clusterId :

    - platcap

bundleId :

    - platcap

workflow :

    - Platform


---

# Identification simulation

# Using identification simulation {#ariaid-title1}

* Freigeben Version: Australia
* 
* Aktualisiert 12. März 2026
* 
* ![](https://www.servicenow.com/docs/portal-asset/ico-clock) 6 Minuten Lesedauer

Identification simulation is a central location for automatically constructing a payload that is guaranteed to be complete and valid. You can then simulate the processing of the payload by the Identification and Reconciliation
Engine (IRE) and examine the results before actually submitting it for execution by IRE.

Use identification simulation to construct an input payload, and simulate processing of the
payload by IRE. You can then examine the results, adjust identification rules if needed, and
re-run the simulation of the updated payload.  
Use the identification simulation to:

* Automatically construct input payload that is based on existing identification rules, hosting and containment rules.
* Simulate execution of a payload (automatically constructed by identification simulation, or manually created).
* Browse payload output and execution log messages for a simulated run.
{#identification-simulation__ul_i5z_n1x_4y}  
Hinweis:  
* Identification simulation does not commit any updates to the CMDB.
* Identification simulation supports simulation of processing payloads that are provided and which contain non-CMDB tables, but doesn't support the generation of such payloads.
{#identification-simulation__ul_glj_5rf_lvb}
**Zugehörige Konzepte**   

* [CMDB dependent relationship rules](https://servicenow-prod.fluidtopics.net/T8id5zOATdZQXqaWaqsSdw "Service definitions consist of CI types and relationship types. Dependent relationship rules define the dependency structure of the CI types and the relationship types in these service definitions, helping in CI identification and in the construction of business service maps.")

## Automatically generate payload {#ariaid-title2}

Use identification simulation to automatically construct an input payload for a
specified class. The constructed payload is complete with any required dependent CIs,
correctly structured, and syntactically valid for processing by the identification and
reconciliation engine (IRE).

### Vorbereitungen

Role required: sn_cmdb_admin or admin

### Warum und wann dieser Vorgang ausgeführt wird

The payload that is constructed during identification simulation is for the specified
class. For a dependent CI class, you will be prompted for information about all
dependencies. After you provide the required details, identification simulation
constructs the payload based on your input.  
Hinweis:  
Automatically generating payloads that contain non-CMDB tables, isn't supported.

### Prozedur

1. Navigate to AllConfigurationIdentification/Reconciliation, and click Identification Simulation.
2. In the Start with CI Class box click Start.
3. On the Payload Information form, in the Data source field, select the data source that is associated with this class update.  
   For the ServiceNow Discovery data source, select <kbd class="ph userinput">ServiceNow</kbd>.
4. Select the Class in the payload.
   1. In the Criterion Attributes area select the CI identifier attributes and then specify the values that uniquely identify a CI.
   2. In the Additional Attributes area specify attributes and values that matching CIs will be updated with.
   {#auto-generate-payload__substeps_q3m_jnq_4y}
5. For dependent CIs associated with dependent identification rules, fill out the Criterion Attributes and Additional Attributes sections in all Container level sections that display.
6. Click Generate Script.
7. If any errors indicate that there are missing fields, fill in the missing fields and then click Generate Script again.

### Nächste Maßnahme

* Click Run Simulation to simulate processing of the payload by IRE.
* Examine the results of the simulation, fine-tune the payload as needed, and combine with other payloads for other classes as desired. After finalizing the payload, use the [createOrUpdateCI()](https://www.servicenow.com/docs/access?context=c_IdentEngineScriptAPI&version=australia&pubname=australia-api-reference&ft:locale=en-US) API to execute the payload by IRE which will result in actual updates to the CMDB.
* Click Copy Script to copy the JSON script into the clipboard. You can then paste that script into a third party software or to another screen of the identification simulation.
{#auto-generate-payload__ul_pyc_tfm_tgb}

## Simulate payload processing using identification simulation {#ariaid-title3}

Use identification simulation to simulate the identification and reconciliation
engine (IRE) process of CI identification for an input payload. Provide a valid payload,
which was constructed using identification simulation or that was created
manually.

### Vorbereitungen

Role required: admin

### Prozedur

1. Navigate to AllConfigurationIdentification/Reconciliation, and click Identification Simulation.
2. **Wahlweise:** To run a simulation of an existing payload:
   1. Click Start in the Start with Existing Payload tile.
   2. On the Insert JSON Payload page, select the Data source that is associated with this class update.
   3. **Wahlweise:** Select Use Enhanced Identification to apply the [identifyCIEnhanced](https://www.servicenow.com/docs/access?context=c_IdentEngineScriptAPI&version=australia&pubname=australia-api-reference&ft:locale=en-US) API for enhanced CI identification, instead of using the identifyCI API.
   4. Paste the JSON payload into the empty canvas.
   {#execute-payload__substeps_xgg_sxw_tz}
3. **Wahlweise:** To construct a new payload click Start in the Start with CI Class tile.  
   See [Automatically generate payload](https://servicenow-prod.fluidtopics.net/sD36MHY810WTKICzlQYBuA#auto-generate-payload "Use identification simulation to automatically construct an input payload for a specified class. The constructed payload is complete with any required dependent CIs, correctly structured, and syntactically valid for processing by the identification and reconciliation engine (IRE).") for more information.
4. Click Run Simulation to simulate processing of the payload by IRE.

### Nächste Maßnahme

1. Examine the results of the simulation in the results pane, and fine-tune the payload as needed:
   1. Click Run #1 to display the Context ID and the Run ID of the simulated run.
   2. Click the drop down arrow next to Run #1 to display additional details.
      * Input: Displays the payload for the simulation.
      * Logs: Displays all the logged messages that IRE generated while simulating processing of the payload, according to the specified logging level.
      * Output: Displays the output payload returned by IRE.
      {#execute-payload__ul_qgm_yzw_tz}
   {#execute-payload__ol_ywh_tzw_tz}
2. After finalizing the payload, use the [createOrUpdateCI()](https://www.servicenow.com/docs/access?context=c_IdentEngineScriptAPI&version=australia&pubname=australia-api-reference&ft:locale=en-US) API to execute the payload by IRE which will result in actual updates to the CMDB.
{#execute-payload__ol_iw2_qzw_tz}

## Set logging level for identification simulation {#ariaid-title4}

Identification simulation logs each step of a simulated payload processing. You can
then examine these run logs to determine if a payload was processed as expected, and if
identification rules are effective. You can adjust the level of logging so it is helpful,
and so that the amount of messages is not excessive or insufficient.

### Vorbereitungen

Role required: sn_cmdb_admin or admin

### Prozedur

1. Navigate to AllConfigurationIdentification/Reconciliation, and click Identification Simulation.
2. Click the Settings icon.
3. Select logging level for the identification and reconciliation engine (IRE) under IE Log Level and for the service cache under Service Cache Log Level.  
   The logging levels are displayed in ascending order, from the minimum level to the maximum level of logging.
4. Click on the Settings icon again to close the Settings dialog box.

## Examine run logs {#ariaid-title5}

Identification simulation provides run logs which are generated by Identification and
Reconciliation Engine (IRE). You can access these run logs for payload runs, to examine
results and for debugging purposes. IRE payload output logs appear in a user friendly format
on a central page.

### Vorbereitungen

Role required: sn_cmdb_admin or admin

### Warum und wann dieser Vorgang ausgeführt wird

Also, internal applications that use IRE (such as Discovery) can call
an internal API to provide a URL to viewing IRE run logs.

Logging is in the context of a specific run of the identification engine, and you can
filter the log list by a specific data source and time range. Up to 1000 run logs
that are up to 2 months old are listed, grouped by Context IDs, and run times. You
can use the [glide.identification_logs.max_run_ids](https://servicenow-prod.fluidtopics.net/XFQWDUAiQCb3UqqrEP6JnQ "Use the Identification and Reconciliation properties to configure the identification and reconciliation engine (IRE).") property to modify the 1000 limit.  
You can control the logging level by using the glide.discovery.identification.log_level Discovery system property and setting the value to one of the following:

* Info
* Warn
* Error
* Debug
* DebugVerbose
* DebugObnoxious
{#examine-identification-engine-logs__ul_ddg_mgh_gcb}  
Hinweis:  
IRE performs an initial verification of a payload before processing identification rules. If IRE detects any duplicate CIs based on any class identifiers, the payload is rejected and processing stops.

### Prozedur

1. Navigate to AllConfigurationIdentification/ReconciliationIdentification Logs.
2. Filter the runs list as follows:
   1. Source: Select the data source for which to display run logs.
   2. Time Range: Specify a time range for which to display run logs.

   {#examine-identification-engine-logs__substeps_ww4_hyq_mz}  
   The Runs list displays all runs for the specified data source, during the specified time range.
3. In the Runs list, click a Run # to display its Context ID and Run ID.  
   A unique Context ID is associated with each specific payload that is run. Each run of that payload, is associated with a unique Run ID. A single Context ID for a payload that is run multiple times is associated with multiple Run IDs.
4. Click the drop down arrow for a Run # to display additional details.  
   * Input: Displays the payload for the run.
   * Logs: Displays all the logged messages that the identification engine generated while running the payload, according to the specified logging level.
   * Output: Displays the output payload returned by the identification engine.
   {#examine-identification-engine-logs__ul_ycb_5sx_4y}
{#examine-identification-engine-logs__steps_gf1_t2w_5gb}